E-commerce

How to use the Ecommerce Metrics group and weighted sorting in Google Analytics?

How to use the Ecommerce Metrics group and weighted sorting in Google Analytics?

October 27, 2026

Wondering how to read your Google Analytics reports without drowning in traffic numbers that tell you nothing about your sales? The short answer: switch to the Ecommerce Metrics group, then sort your sources with weighted sorting. This is the fastest way to see which sources actually generate revenue.

The trap is classic: a report sorted only by conversion rate puts sources with three visits and one order at the top, which are impossible to leverage. These two features exist, but they are visually subtle in the interface. Once spotted, they become reading reflexes to drive your acquisition and retention.

The challenge is twofold. On one hand, you want to identify channels that deserve additional budget. On the other, you want to stop funding sources that bring traffic but never convert. Without these two settings, you navigate blindly between flattering rates and misleading volumes. With them, every line in the report becomes a testable hypothesis, then a documented acquisition decision.

So how to use the Ecommerce Metrics group and weighted sorting in Google Analytics? On the agenda:

  • What exactly does the Ecommerce Metrics group do in a standard report?

  • Why is sorting by volume more useful than sorting by rate?

  • How to spot an underutilized source like Bing compared to Google?

  • What checklist to adopt before drawing a conclusion from a report?

Let's go.

Summary

Why do your traffic reports not talk enough about sales?

By default, a report like Sources > All Sources displays the 'Site Usage' metrics group. You find the number of visits, pages per visit, average duration, percentage of new visits, and bounce rate. These are good behavioral indicators, but they do not answer the only question that matters to a merchant: how much each source has earned for me.

A channel can send many visits and sell nothing. Another can send few people and generate regular orders. As long as you stay on usage metrics, these two cases look alike. You see traffic, you do not see money.

Result: you make investment decisions based on weak signals. You strengthen a campaign because the bounce rate is low, even though it does not convert. You cut a subtle source that, in reality, carried your best margins. The report is not false, it is simply silent on the essentials.

The Google Analytics interface is clean, sometimes too much: some useful capabilities get lost on screen. The Ecommerce group is one of them, and it is precisely the one that links traffic to money. As long as you do not activate it, you optimize an audience, not revenue.

Convert over 2,000 customers on average per month with Qstomy.

The world’s 1st Shopify AI dedicated to customer conversion

Empowering 200+ e-commerce merchants

How to enable the Ecommerce Metrics group in one click?

Each standard report has one or more predefined metrics groups at the top of the table. By default, the first group is displayed. To change the perspective, simply click the Ecommerce group link: the report columns are immediately replaced.

You then switch to a commercial reading: visits, revenue, transactions, average value, e-commerce conversion rate, and value per visit. No need to cross three exports to answer 'which source earns for me'. The table becomes directly actionable.

The reflex to adopt is simple: as soon as you open a traffic report, check which group is active. If you see 'Site Usage', you are reading an audience report. If you see 'Ecommerce', you are reading a commercial performance report. It is not the same tool for the same decision.

The gesture is tiny, the impact is huge: you no longer read the same report. You read the same table with the right numbers. Add this click to your weekly routine and you will save precious time at every acquisition review.

Which e-commerce metrics should you prioritize?

Once the Ecommerce group is activated, do not look at everything at the same level. Three metrics tell the complete story of a source: revenue, e-commerce conversion rate, and value per visit.

Revenue gives the raw weight of a channel. The conversion rate indicates its ability to turn intent into an order. Value per visit synthesizes both: it tells you how much each visit earns, independent of average order value. It is often the most accurate metric for comparing channels of very different sizes.

Average order value completes the picture: a channel may convert few but with high baskets, which changes the strategy to adopt. Also keep an eye on the raw number of transactions, especially to spot sources that rely on low volume and are therefore unreliable.

In short: prioritize value per visit as your compass, then explain it with the conversion rate and revenue.

In which reports is the Ecommerce group available?

The Ecommerce group is not present everywhere. It is absent, for example, from the Pages report. However, it appears in many standard reports where it makes full sense, especially on traffic sources.

A very concrete use case: the Content > Events > Top Events report. If you track add to cart as a custom event, you immediately see the conversion rate of visits that triggered this event.

You would get the same information by building a custom segment on this event. But why complicate things when a simple click suffices? This logic applies to all your key events: add to cart, view promotion, start checkout.

How to compare two add-to-cart methods?

Imagine your customers can add a product to the cart in two ways: from a quick view window, or from the full product page. If your event tracking distinguishes between the two, you can compare their actual performance.

The Ecommerce group then shows you which of the two methods converts best. It is no longer a design intuition, but a documented trade-off. You will know whether to push the quick view, refine it, or invest in the product page.

Remember to also look at the abandonment rate at each step. One method may trigger more add-to-cart actions but with a lower completion rate: the diagnosis is not the same. You will then choose between optimizing the checkout flow or the product experience.

This type of test pairs well with a solid category page strategy, where the path to the cart is often the real subject. Details matter: one less micro-friction means more orders.

Also remember to link these observations to your e-commerce conversation analysis, which often explains the why behind the numbers.

Why does the same order appear in multiple rows?

In a report where a single visit can contain multiple occurrences of the primary dimension, e-commerce data is counted multiple times. A visitor who adds a product to the cart, clicks an internal promotion, and then buys will have their transaction appear in the 'Add to cart' row and in the 'Internal promotion' row.

This is not an error, but a point to know before summing columns. If you naively sum the rows, you will count the same order twice.

The correct reading is comparative, not cumulative: each row describes a journey experienced by a customer. Keep this reflex in mind to avoid drawing false conclusions from an overly flattering total.

Why is sorting by conversion rate misleading?

With the Ecommerce group activated, the reflex is to sort by conversion rate. Click the column header in descending order, and the result is spectacular... but useless.

At the top of the report are sources that sent very little traffic, with a single transaction that happened to land. Their conversion rate is huge, yet you can do nothing with it: it is not a usable volume.

In other words, raw sorting by percentage rewards statistical anomalies. It drowns out serious sources under micro-signals. It is the kind of report that gives the impression of having found a gem when there is nothing to dig into.

This limit is mathematical, not technical. A channel with three visits and one order shows a 33% conversion rate; a channel with three thousand visits and one hundred orders shows a 3%. The second deserves your full attention, the first tells you nothing. Sort without weighting and you will compare noise to a trend.

How to enable weighted sorting in two clicks?

This is where another subtle feature comes into play: weighted sorting. It accounts for traffic volume in the equation, rather than looking at the percentage alone.

The manipulation is simple. From the sort by conversion rate, click the 'Sort Type' button at the top of the report, then select 'Weighted'. Two clicks, and the list changes its face.

The report now places at the top the source/media pairs that combine both high traffic and a good conversion rate. These are the ones that deserve your attention, as they rely on real and reproducible volumes. The ranking finally becomes actionable for your acquisition decisions.

Warning: weighted sorting only works on metrics expressed as a percentage. On revenue or number of transactions, it has nothing to weight. It is a tool reserved for rate columns. Use it multiple times in a row, on conversion rate and then on bounce rate, and you will see a more honest portrait of your channels.

How to spot an underutilized source using weighted sorting?

On a properly weighted report, a source can reveal a clear opportunity. Typical example: Bing brings significantly less organic traffic than Google, but converts about 50% better.

In other words, at comparable volume, this source generates more revenue. Let's push the comparison: it also converts slightly better than Google's paid referrals. These two gaps, read side by side, justify an investigation.

Another possible reading: a source may show an average rate but a very high volume. Here, the stake is to increase its conversion by a few tenths of a point, as volume multiplies every improvement. Weighting allows distinguishing these two situations, often confused in a standard sort.

Should we strengthen presence on this source, both organically and paid? Perhaps. The report does not give the answer, but it asks the right question. This is exactly the role of weighted sorting: transforming raw data into a concrete work lead for your store.

How to link these data points to your other channels?

The figures in a report truly gain value when they cross-reference your other channels. A source that converts well in search may deserve a test in advertising, or vice versa depending on your catalog.

For example, good organic conversion on a specific theme indicates a message to test in paid ads for the same intent. Conversely, an effective paid source may justify SEO work on the corresponding pages to lower your acquisition cost in the medium term.

If you are already working on your presence on social media, compare these results with your e-commerce Facebook Ads strategy, your flux Google Shopping, and more broadly your customer service on social networks.

The goal is not to measure everything, but to converge your efforts toward what sells. An underutilized organic source can become a profitable paid lever once tested with the right message. And an expensive paid source may reveal a need for organic content in the medium term.

How does Qstomy help leverage these analytics insights?

A report is useless if it stays in a tab. At Qstomy, the Shopify AI agent transforms analysis into concrete actions for your clients, from the first click through to post-purchase.

Concretely, Qstomy guides toward purchase (product recommendations, upsell and cross-sell), streamlines the cart, tracks packages, answers account questions, and applies your return policy in customer service. Over 100 merchants already use it to improve conversion and satisfaction.

The idea is simple: a customer who quickly finds the right product and gets a clear answer returns. Your analytics data tells you where it blocks; Qstomy acts at the point of the blockage. To go further, cross-reference this with your E-commerce CRM and good support data as well as your lever to increase sales.

What checklist before concluding on an e-commerce report?

Before drawing a conclusion, review these points.

  • Group activated : the Ecommerce metrics group is correctly selected at the top of the report.

  • Weighted sorting : the ranking takes volume into account, not just the percentage.

  • Volume suffisant : the top source has enough visits to be credible.

  • Double comptage : do not sum lines containing the same order.

  • Action : each observation leads to a concrete decision.

In short

The Ecommerce group replaces traffic metrics with visits, revenue, transactions, average value, conversion rate, and value per visit. Weighted sorting then corrects misleading rankings by taking volume into account. Two clicks that change how you read your reports, and a ritual to repeat every week to stay focused on revenue rather than raw traffic.

Frequently Asked Questions

Where to activate the Ecommerce group? At the top of each standard report where it is available, via the metrics group link.

Does weighted sorting work everywhere? No, it only works on metrics expressed as a percentage.

Is the Ecommerce group missing from a report? Yes, it is missing, for example, in the Pages report. It can be recreated in a custom report. To complete, see our optimization guide for Google and our SEO strategy for category pages.

Enzo

October 27, 2026

Convert over 2,000 customers on average per month with Qstomy.

The world’s 1st Shopify AI dedicated to customer conversion

Empowering 200+ e-commerce merchants

Subscribe to the newsletter and get a personalized e-book!

No-code solution, no technical knowledge required. AI trained on your e-shop and non-intrusive.

*Unsubscribe at any time. We do not send spam.

Subscribe to the newsletter and get a personalized e-book!

No-code solution, no technical knowledge required. AI trained on your e-shop and non-intrusive.

*Unsubscribe at any time. We do not send spam.