E-commerce

How to resolve internal network issues with a fast connection?

How to resolve internal network issues with a fast connection?

October 30, 2026

Wondering how to enjoy a fast Internet connection without being limited by your internal network? The answer is simple: you must align your network infrastructure with the speeds you have subscribed to.

A poorly configured internal network turns even the best bandwidth into a bottleneck of slowness, impacting your sales, customer service, and logistics processes.

The most common pitfall is investing first in a fiber plan, then neglecting the Wi‑Fi mesh and Ethernet cabling. A quick check can prevent costly frustrations.

In addition to hardware, software configuration, network segmentation, and proactive monitoring play a crucial role in ensuring a smooth experience for your customers and teams.

So, how to resolve internal network issues with a fast connection? Here is the agenda:

  • Why isn't the provider's speed always visible on your workstations?

  • How to choose between Ethernet cabling and Powerline adapters?

  • Where should you place the router to maximize Wi‑Fi coverage in a small office?

  • How can Qstomy help monitor network health and prevent service outages?

  • What quick checklist should you run before launching a promotional campaign to ensure the network can handle the load?

Let's go.

Summary

Why isn't the provider's speed always visible on your workstations?

Even with a 76 Mbps fiber plan, you might only get 7 Mbps on your computers. The most common cause is a poorly positioned Wi‑Fi network or interference between the router and brick walls. The signal degrades as distance increases, especially if the router is installed near the phone jack rather than in the center of the office.

Conversely, dedicated Ethernet cabling ensures every workstation utilizes the maximum speed of the plan. If the cost of full cabling seems high, start by measuring performance with a speed test searchandising interne to identify weak points.

It is also useful to enable "QoS" (Quality of Service) mode on the router to prioritize critical traffic, such as payment transactions, and to check that network drivers on each workstation are up to date to avoid software limitations.

Convert over 2,000 customers on average per month with Qstomy.

The world’s 1st Shopify AI dedicated to customer conversion

Empowering 200+ e-commerce merchants

How to choose between Ethernet cabling and Powerline adapters?

Ethernet cabling remains the most reliable solution: it offers stable bandwidth and avoids losses due to electrical interference. Hiring a technician to lay cables, measure lengths, and install RJ45 jacks may represent an investment, but it guarantees long-term performance.

Powerline adapters, which use the domestic electrical network, constitute an economical alternative. Their effectiveness depends heavily on the quality of the electrical wiring and the distance between adapters. In recent homes, you can reach up to 500 Mbps; in others, the speed drops drastically. Test with a single adapter first before deploying multiple ones.

For environments with high device density, prefer a mix: Ethernet for fixed workstations and Powerline only for areas where cabling is difficult, ensuring you choose HomePlug AV2-compatible models to maximize stability.

Where should you place the router to maximize Wi‑Fi coverage in a small office?

A router placed in a corner or under a table quickly loses range. Placing it high up, on a central shelf, at least one meter off the floor, can double the perceived speed for mobile devices. Avoid heavy obstacles like metal cabinets or concrete walls.

If you must keep the router near the phone jack, consider installing a repeater or signal amplifier. Position the repeater halfway between the router and critical areas, ensuring it still picks up a strong signal. Poor positioning can cut speed in half.

Also, orient the router antennas (if adjustable) perpendicularly to cover both horizontal and vertical areas, and enable the 5 GHz band for nearby devices that support this spectrum, freeing up the 2.4 GHz channel for more distant peripherals.

What are the limits of a 100 Mbps connection on a budget router?

Even if your plan exceeds 100 Mbps, an entry-level router cannot fully utilize these speeds. 100 Mbps Ethernet ports become the bottleneck as soon as you connect multiple wired devices. Additionally, 2.4 GHz Wi‑Fi rarely offers more than 30 Mbps in crowded environments.

Investing in a Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax) router with gigabit ports resolves most issues. These models support multiple simultaneous streams, ideal for traffic spikes during promotional campaigns.

Additionally, ensure the router firmware is up to date and disable unnecessary features like WPS, which can introduce additional latency. Proper configuration of dual‑band mode allows balancing the load between the two frequency bands.

Why keep a Wi‑Fi network even with full cabling?

Wi‑Fi remains essential for mobile devices, tablets, and temporary workstations. Even with a wired network, you must provide seamless wireless connectivity for employees moving around the store or for visitors using guest Wi‑Fi.

A best practice is to create two SSIDs: one dedicated to company devices, secured with WPA3, and a second guest network for customers. This avoids the risk of saturating the main network while maintaining a smooth experience.

To ensure good coverage, deploy additional access points in high-density device areas and limit the number of clients per access point to 20‑25 to avoid congestion and preserve network responsiveness.

How to quickly identify bottlenecks before a marketing campaign?

Before launching a promotion, run a network load test on your Shopify store. Use tools like AI-generated FAQs to simulate a surge of visitors. Measure server response time and Wi‑Fi throughput in key areas.

If you observe more than 30% packet loss or latency exceeding 100 ms, reconsider the router placement or increase the number of access points. Proactive prevention avoids cart abandonment during traffic spikes.

Additionally, document the results in the Qstomy dashboard to establish a baseline. This way, each campaign can be compared to previous ones, and improvements will be quantifiable.

What is the best network backup strategy in case of a failure?

Planning a backup connection, such as a 4G dongle, ensures your store stays online even if the main speed drops. Configure the router to automatically switch to the 4G connection as soon as speed falls below 5 Mbps.

Furthermore, keep a local copy of critical data (product catalog, payment settings) and sync it regularly with the cloud. Thus, your customer service, accessible via Qstomy, can respond to requests even during network outages.

It is recommended to test the failover weekly by temporarily disabling the main connection to ensure the recovery process works smoothly.

How does cable choice impact network speed and stability?

A Category 5e (Cat5e) Ethernet cable supports up to 1 Gbps over 100 m, but it can be sensitive to interference if the jacket is of poor quality. Opt for Cat6 or Cat6a for an additional safety margin, especially if you plan to use Wi‑Fi 6 or heavy applications.

Avoid standard telephone wires or power cables as repeaters, as they introduce noise that degrades the signal. Professional cabling ensures every workstation operates at the full capacity of the plan.

When deploying cabling, adhere to maximum length standards (100 m) and use shielded connectors if the cable runs near sources of electromagnetic interference such as power lines.

When should you consider Wi‑Fi repeaters or additional access points?

Repeaters are useful only if your space exceeds 30 m² and the router signal does not penetrate distant areas. Position the repeater halfway between the router and the area to be covered, ensuring it captures a signal of at least -60 dBm.

For warehouses or multi-story stores, prioritize dedicated access points connected via Ethernet. They offer stable bandwidth and avoid the 'double bounce' phenomenon that weakens the signal of classic repeaters.

Also consider using mesh systems that dynamically manage traffic distribution and offer a homogeneous experience, especially in environments where device density fluctuates significantly.

How to secure the internal network to protect customer data?

Enable WPA3 encryption on your Wi‑Fi and disable obsolete protocols like WEP. Create separate VLANs for administrative traffic, customer traffic, and guests. Thus, even in case of intrusion, sensitive data remains isolated.

Integrate security alerts into the Qstomy dashboard to be immediately informed of abnormal throughput or unauthorized connections. The correlation with support tickets regarding manufacturing delays helps you quickly diagnose network-related incidents.

Do not forget to regularly change router administrator passwords, enable MAC filtering for trusted devices, and implement an intrusion detection system (IDS) to monitor abnormal behaviors.

How does Qstomy help monitor and optimize your internal network?

Qstomy integrates a real-time dashboard that measures latency, packet loss rate, and available throughput from each access point. You receive notifications as soon as speed drops below a critical threshold, allowing you to intervene before your customers encounter payment issues.

In addition to monitoring, Qstomy offers automated scripts to restart routers, switch to 4G backup connections, or reassign server resources during traffic spikes. These automations reduce downtime and improve conversion rates.

Finally, performance reports are available in the section support client, giving you complete visibility into the network's impact on after-sales service.

Integrations with third-party monitoring solutions, such as Grafana or Datadog, allow you to extend analysis capabilities and correlate network indicators with real-time sales metrics.

What is a quick checklist before launching a promotional campaign?

In short

  • Check actual throughput : run a speed test from each workstation.

  • Wiring : ensure cables are Cat6 or higher.

  • Router placement : place it high, centrally, away from brick walls.

  • Wi‑Fi : enable WPA3, create separate SSIDs, test repeaters.

  • Sauvegarde : configure a 4G backup connection.

FAQ

My speed remains at 7 Mbps even with fiber? Check router placement, wiring, and Wi‑Fi interference. A Powerline test can also reveal a power supply issue.

Should I really invest in Ethernet cabling? Yes, if you want consistent performance. Powerline adapters are an intermediate solution but depend on the quality of the electrical network.

How can Qstomy help me during Black Friday? By monitoring latency in real time and automatically switching to the 4G connection as soon as throughput drops below 50 Mbps.

That's all for now! You now have the keys to align your internal network with your Internet connection speed.

To go further: How to handle customer questions for free trial subscriptions - Qstomy, How to manage customer requests on invoices with incorrect addresses - Qstomy.

Additionally, plan for a semi-annual review of the network to adjust parameters following changes in your traffic and product offering.

Enzo

October 30, 2026

Convert over 2,000 customers on average per month with Qstomy.

The world’s 1st Shopify AI dedicated to customer conversion

Empowering 200+ e-commerce merchants

Subscribe to the newsletter and get a personalized e-book!

No-code solution, no technical knowledge required. AI trained on your e-shop and non-intrusive.

*Unsubscribe at any time. We do not send spam.

Subscribe to the newsletter and get a personalized e-book!

No-code solution, no technical knowledge required. AI trained on your e-shop and non-intrusive.

*Unsubscribe at any time. We do not send spam.