E-commerce
October 29, 2026
Are you wondering how to refine behavioral targeting on Facebook to reach the right prospects? By combining the pixel, precise inclusion/exclusion criteria, and a small number of qualified visitors, you can create lookalike audiences that convert. The challenge lies in selecting the right behaviors and rigorously tracking performance to avoid budget waste. It is also crucial to ensure compliance with GDPR and validate the quality of collected data to ensure maximum relevance. Finally, continuous optimization of targeting parameters, based on feedback and key metrics, will allow you to maximize your advertising ROI. So, how do you refine behavioral targeting on Facebook to create lookalike audiences? Here is the agenda:
What is behavioral targeting on Facebook and why use it?
How to structure an audience by including and excluding behaviors?
What is the role of the Facebook pixel in creating lookalike audiences?
How to create a campaign focused on the 'Send traffic to website' objective?
How Qstomy facilitates the setup and tracking of behavioral targeting?
Let's go.
Summary
What is behavioral targeting on Facebook and why use it?
Behavioral targeting encompasses interests, purchasing habits, and actions taken on the web. On Facebook, it is found in the 'Detailed Targeting' section, where you can select specific behaviors, such as online shoppers or those interested in new technologies. This approach avoids guessing keywords and allows you to address users already in the purchasing phase.
By leveraging this data, you benefit from a more qualified audience, which increases click-through rates and lowers cost per result.
Among the most relevant behaviors for e-commerce are: frequent buyers, users who shop on mobile devices, and those who have already interacted with similar ads. By combining these signals, you create a segmentation layer that naturally aligns with the purchasing journeys of your most profitable prospects.

Convert over 2,000 customers on average per month with Qstomy.
The world’s 1st Shopify AI dedicated to customer conversion



Empowering 200+ e-commerce merchants
How to structure an audience by including and excluding behaviors?
In detailed targeting, you can add 'Include' behaviors and then refine them with exclusion criteria. For example, include 'Frequent buyers of high-tech products' and exclude those who have recently expressed interest in 'low-cost products'. This combination creates a precise filter that reduces the risk of reaching too broad an audience.
Use the relevance slider (green-yellow-red) to verify that your audience is neither too narrow nor too broad.
Once your audience is defined, validate its potential by launching a small A/B test with limited budgets. Compare the cost per result of a purely behavioral audience with an audience including one or two complementary interests. This experimentation will give you concrete indicators to decide whether to broaden or further refine your targeting.
What is the role of the Facebook pixel in creating lookalike audiences?
The pixel is the cornerstone of any audience strategy on Facebook. It collects visitor actions on your Shopify store (page views, cart additions, purchases) and creates custom audiences based on these behaviors. Once you have gathered at least 100 unique visitors who have completed the desired action, you can transform this audience into a lookalike audience.
In addition to tracking conversions, the pixel feeds Facebook's algorithms to identify profiles that behave similarly to your best customers.
To go further, configure custom events (e.g., 'Visit to a key product page', 'Cart abandonment over €100') and enable server-side tracking to reduce data loss due to script blockers. These events enrich the pixel's database and allow for the creation of even more precise lookalike audiences.
How to create a campaign focused on the 'Send traffic to website' objective?
Select the 'Traffic' objective when creating your ad set. Focus on the behavioral targeting you have defined, without adding similar audiences right away. The idea is to generate qualified traffic that will fill your source audience.
Optimize the text and visuals to spark immediate interest, then direct users to a dedicated landing page where you have installed a secondary pixel to further refine the collected data.
In parallel, choose an appropriate bidding strategy: optimized CPC (oCPC) to maximize clicks or optimized CPM (oCPM) if you already have strong conversion signals. Test different placements (feed, stories, right column) to determine where your audience responds best, and adjust budgets based on the performance of each placement.
How to collect enough visitors to generate a source audience?
If your store is new, create a high-conversion landing page (exclusive offer, free guide, etc.). Place a dedicated pixel on this page to record each visitor as a key event. By combining paid ads and organic content (Instagram posts, stories), you quickly increase the volume of visits.
When you have reached 100% of unique visitors, you have a solid foundation to move to the next step.
To accelerate collection, leverage highly targeted lead magnets (e-book, webinar, promo code) and use retargeting sequences that send visitors back to specific pages based on their initial interaction. Thus, each visitor is immediately classified according to their engagement level, which enriches the quality of your source audience.
When can a custom audience be transformed into a similar audience?
Facebook recommends a minimum of 100 active users in your source audience, but 1,000 offer better precision. Once this threshold is reached, go to the Audience Manager, select 'Create Similar Audience', choose your custom audience, and define the size (1% to 10% of the population of the target country).
The similar audience created can be used in other ad sets to expand your reach while maintaining targeting quality.
When choosing the percentage, prioritize 1% first to test relevance, then gradually expand to 2% or 3% if the initial results are positive. Do not forget to adjust geolocation based on the markets where your products sell best, and refresh the audience regularly to take advantage of new data collected by the pixel.
How to avoid the pitfalls of targeting that is too broad or too narrow?
The relevance meter (red-yellow-green) indicates the degree of targeting. A 'defined' status (green zone) means your audience is balanced. If the meter turns red, you have restricted your target too much and the platform will not be able to deliver your ads. Conversely, an excess of yellow indicates targeting that is too broad, which increases the cost per click.
Gradually adjust inclusion and exclusion criteria until you reach green.
Also use the Facebook Audience Insights tool to analyze the demographic distribution, interests, and behaviors of your current audience. This information will allow you to identify underutilized segments or redundancies, and adjust your targeting accordingly to maintain an optimal balance between reach and relevance.
How to combine behaviors and interests to refine your audience?
Start by selecting a central behavior (e.g., 'Shop online regularly'). Then add one or two complementary interests, such as 'Wearable technology' or 'Eco-friendly fashion'. This overlap allows you to reach users who share both the purchasing behavior and the passion for your niche.
Test several combinations and keep those that generate the best conversion rate.
Another approach involves nesting broader interests (e.g., « Innovation ») with very specific behaviors (e.g., « Uses mobile payment apps »). This creates a hybrid audience that benefits from both behavioral precision and the expanded reach of popular interests.
What best practices for testing and optimizing behavioral audiences?
Launch A/B testing ad sets: one group with only the behavior, another with a behavior + interest mix, and a third with targeted exclusions. Monitor cost per result, CTR, and ROAS for at least 7 days.
Keep the best-performing version, iterate by adding or removing criteria, then re-run the test. The optimization process must be continuous.
Ensure each variant receives a sufficient impression volume to reach statistical significance (at least 100 conversions or a budget of 5 % of the total). Use Facebook's automation tools to schedule tests in sequence, avoiding day-of-week or time-of-day biases.
How to measure the performance of similar audiences created via behavioral targeting?
Track key metrics in the Facebook Ads Manager dashboard: cost per click (CPC), conversion rate, average order value, and return on ad spend (ROAS). Cross-reference this data with Shopify pixel reports to see how many visitors actually made a purchase.
Use Qstomy insights to quickly visualize trends and detect underperforming audiences.
Also consider analyzing attribution across different windows (7 days, 28 days) to understand the average conversion delay of your similar audiences. This granularity helps you adjust bids and budget based on the time needed to turn a prospect into a loyal customer.
How Qstomy facilitates the setup and tracking of behavioral targeting on Facebook?
Qstomy directly integrates the Facebook pixel into your Shopify store, allowing you to automate the creation of custom audiences from every visit, cart addition, and purchase. Thanks to its centralized dashboard, you can visualize the size of your source audience in real-time and automatically trigger the creation of a similar audience as soon as the 100 visitors threshold is reached.
Additionally, Qstomy offers optimization recommendations based on customer behavior analysis, as well as alerts to avoid targeting that is too narrow or too broad. Discover how to activate the pixel via our guide Training an e-commerce chatbot with Shopify ou consulter Increase sales with smart product recommendations to fully benefit from the ecosystem.
The dashboard also provides exportable reports compatible with Google Data Studio or Excel, facilitating the creation of custom reports for your marketing teams. Finally, Qstomy sends real-time notifications when a source audience is ready, allowing you to launch the look-alike campaign immediately without wasting time.
What is the essential checklist before launching a behavioral targeting campaign?
In short
Pixel installed : verify triggering on each key page.
Audience source : at least 100 unique visitors, ideally 1,000.
Precise targeting : combine inclusions, exclusions, and relevant interests.
Test A/B : prepare at least three different sets.
KPI tracking : CPC, CTR, taux de conversion, ROAS.
Allocated budget : start with 5 % of the total budget and adjust based on performance.
Optimized creative : vary the copy, image, and CTA for each audience.
FAQ
What similar audience size should I choose? Start with 1 % of the target country's population, then gradually expand.
Should I add interests if I already have a behavior? Yes, one or two complementary interests enhance precision.
Can Qstomy create the audience automatically? Yes, as soon as the pixel detects 100 visitors, the similar audience is generated.
What is the best time to launch tests? Ideally after accumulating at least 7 days of conversion data to ensure metric stability.
To go further: How to reassure buyers before and after purchasing expensive products? - Qstomy, How to integrate Shopify with Amazon for products, inventory, and reviews? - Qstomy, Why use social media for e-commerce customer service? - Qstomy, Collect customer reviews without over-soliciting buyers - Qstomy, E-commerce searchandising: optimize internal search with customer keywords - Qstomy.

Enzo
October 29, 2026


